Koenders Aeration Stones
Koenders Aeration Stone |
Koenders Foot Valve: | Air Line 3/8" poly tubing - any length:
Koenders Aeration Stone: 9' Silica Sand Disk | a fine-bubble air stone diffuser:
Koenders Aeration Stone:
in a 5 Gallon Bucket set on top of gravel |
with Foot Valve & Air Line attached | Aeration page |
Koenders Pond Aeration Windmills | Electric Aerators |
Red Valve: http://www.redvalve.com/ |
Tideflex difusser: http://www.redvalve.com/airdiffuser.html |
Aeration: http://www.redvalve.com/applications.htm |
Domeflex: http://www.redvalve.com/products/ |
Water Treatment: http://www.redvalve.com/applications/Wastewater/Wastewater.html |
Offers excellent mixing and oxygen transfer characteristics
Alita Air & Water Pumps: http://www.alita.com | links |
Air Stone: http://www.alita.com/diffuser/airstone/as-1b.html |
Air Diffusers for sewage treatment projects |
Red Valve: http://www.redvalve.com |
Red Valve Company, Inc.
700 North Bell Avenue, Pittsburgh, PA 15106
Tel: (412) 279-0044 FAX (412) 279-7878
e-mail: valves@redvalve.com |
TubeFlex | Fine Bubble
| http://www.redvalve.com/products/air_diffusers/Tubeflex.html |
TubeFlex: $52.00
-- Check Valve
-- Deflector bushing
-- Membrane is replaceable | perforated elastirmer membrane | $12
-- replace every 5 years
-- Maximum: 6 SCFM | Standard Cubic Feet Per Minute
-- Typical : 2 SCFM |
Length: 24 inches | 2" diameter
-- Oxygen Rate | Calculate |
-- Jeff Kelly | Product Manager | (412) 279-0044 | JKelly@RedValve.com |
The new Tubeflex® Fine Bubble Air Diffuser
from Red Valve was developed to overcome the limitations of traditional fine bubble diffusers and features breakthrough innovations not found in any other tube or disk diffuser design.At the heart of the Tubeflex® is an integral Tideflex® Check Valve that prevents backflow of sludge and debris into the air diffuser manifold piping. The Tideflex® virtually eliminates clogging and ensures maximum efficiency.
The body of the Tubeflex® is hollow, with an open end that reduces buoyancy. The Tubeflex® measures 24" long with a 2" diameter.
One of the most important features of the Tubeflex® is its unique flexible mounting system. An impact-resistant bushing is used that allows the Tubeflex® to deflect up to 15 degrees. The impact bushing system resists breakage of the diffuser from loads and impacts occurring at the cantilevered end.
The membrane of the Tubeflex is replaceable and uses preset tension clamps to ensure an adequate seal when replaced by operators.
Overall, piping systems are typically 25% less costly than top mounted disk-type systems.