Koenders Air Powered Water Pumps

MWR
Malibu Water Resources
Malibu Water Resources | Our Site Directory II
Our Mission: To make the World a better place -- one pond at a time™
Pond Aeration Windmills | Malibu Water Resources 800 490-9170, 818-992-4610 Fax: 818-992-4610 | We Can Ship Worldwide

Koenders Air Powered Water Pumps
Work with Koenders Windmills or Electric Aerator Air Compressor
Koenders: Our Complete Price List on one page |
The Koenders Water Pumps | LD8 | SW16: Koenders Inc. water pumps |
These simple and inexpensive water pumps allows you to get additional use out of your windmill. Placed in the pond, dugout or shallow well, they can deliver fresh water to your desired location when you need it. The water pumps are ideal for watering your gardens and livestock.

SW16 Water Pump
Koenders SW16 Air Powered Shallow Water - Water Pump

Koenders Saddle Float and Anchor Bracket
Here is the new Koenders Saddle Float and Anchor Bracket accessory for stabilizing the SW16 Water Pump under water.
Installation
Position the Saddle Float and Anchor Bracket so that when the SW16 Water Pump is pulled under water it will float in a horizontal position when filled with water. An Anchor Weight of at least 75 to 80 lbs. or more is needed to hold the SW16 Water Pump under the water. Attach a nylon rope to the Anchor Bracket on the SW16 Water Pump. If the anchor weight has a loop on it, run the nylon rope down through the loop on the anchor weight and bring the end of the rope back to the shore. You can then adjust the height of the SW16 Water Pump from the shore by pulling on the nylon rope.
Koenders SW16 | Shallow Water Pump | Price: $180
When shallow water conditions are prevalent, the Koenders SW16 maintains the ability to pump water to where you need it. The horizontal design allows you to pump down to 12" of depth and produce up to 10 liters per minute. The SW16 is 22" long x 9" dia. It must be submerged in a minimum of 1.5 ft. of water to operate effectively.

Koenders LD8 | Price: $180
When you have plenty of depth and require a long horizontal run,
the LD8 can pump up to 2 gal. per min. With a PVC outer casing, only 3 moving parts and brass check valves, the LD8 is virtually maintenance free. Only 6 1/4" dia. x 60" long and able to fit down wells, it requires 6 ft. of water depth and must be vertically submerged.

The plastic and stainless steel construction is kept buoyant in its operating position by a sealed cavity. You simply anchor it to the bottom (with about 80 lbs. of weight, it gets buoyant when filled with air), and attach the hoses to the windmill. It can also be hooked up to an existing compressor. The water pump features a 3 3/4" enlarged filler hole for faster filling. The water intake is protected by a galvanized screen to prevent debris from getting into the pump. A new secondary float releases the air pressure, creating a faster cycle time.

Koenders Water Pumps

Water Pump
Body
Fittings
Check Valves
Air Inlet
Water Inlet
Water Outlet
Air Release
Moving Parts
LD8 Water Pump
PVC
PVC
Brass
3/8 brass
1 1/4
3/4
5/8 brass
3 SW16 Water Pump
Polyethylene
PVC
Brass
3/8 brass
1 1/4
3/4
5/8 brass
3

Pumping Comp. in Liters and Gallons per minute
and 10 to 20 miles per hour wind speed:

Pumping Lift:
10 ft. Lift
20 ft. Lift
30 ft. Lift
40 ft. Lift

Liters:
10.0
8.0
6.9
3.5

Gallons:
2.60
2.10
1.50
0.92

Minutes:
1.25 min
2.0 min
2.4 min
4.2 min

Per hour:
156.0 gal. 126.0 gal.
90.0 gal.
55.2 gal.

SW16 | Shallow Water Pump | View I

SW16 | Shallow Water Pump | View II

Koenders T-Valve Assembly: $30 |
This is a well made T-Valve Assembly, and it fits the 3/8" Air Line
We use it to hook up and regulate the air sent to Two (2) Aeration Stones or an Air Stone & Water Pump.

Koenders Pond Aeration Windmills | Electric Aerators |
New Topic

Solar Water Pumps |